Non-combustible mineral bound light weight board calcium silicate board. 2 in 1 solution, that provides fire protection to steel and eliminates the requirement for additional cladding.

Fire resistant Partitions to be built using various Promat items.1 layer of 9mm board to achieve up to 120 minutes fire integrity from fire exposure side.

Non-combustible matrix engineered mineral board. Qatar Civil Defense approved system. 1 layer of 9mm board to achieve up to 240 minutes fire integrity.

PROMATECT®-H: Non-combustible matrix engineered mineral board. 9mm Promatect H board can provide up to 120 minutes fire integrity. Qatar Civil Defense approved system.

PROMATECT® L500: A non-combustible low-density calcium silicate board. Steel lining not required, the board itself will act as a duct.

A 50 mm and 60 mm thick pre-coated mineral wool board suitable for sealing large opening with multiple penetrationIn fire-rated rigid & flexible walls and floors.

Non-combustible matrix engineered mineral board. Calcium silicate. Easy fix. Compliant to NFPA 502 & IAN 20 standards. Board thickness 27.5mm.

PROMASIL® boards have excellent thermal and mechanical properties, making them ideally suited for high temperature applications, especially in furnaces. PROMASIL® is available as boards and pipe section.

Because of their exceptional performance level and compact and light format our microporous materials are most commonly used for applications in iron and steelmaking, aluminium production, industrial furnaces.

PROMASPRAY®-P300: Vermiculite and gypsum-based product.
PROMASPRAY®-P400: Vermiculite and Portland cement-based product.
Cafco FENDOLITE® MII: Vermiculite and Portland cement-based product.

Flexi-Coat® is a highly advanced flexible penetration and aperture sealing system. The Flexi-Coat® is supplied in the form of both completed pre-coated Flexi-Coat® Fingers and as a coating to be applied to stone/mineral wool backing material. Flexi-Coat® has also been tested in accordance with EN1364-4 and is third party certified.

Pyrocoustic® Fire Resistant Sealant

Pyrolastic® Silicone is a fire-resistant silicone sealant. It is used to reinstate the fire resistance of wall and floor construction in linear joints and where apertures are penetrated by services. Pyrolastic® Silicone, once cured, is a permanently flexible silicone rubber.

Pyropro HPE is a fire resistant, intumescent sealant for interior penetration seals. It is designed to provide a high-volume expansion and pressure seal during a fire for areas where combustible services penetrate apertures in floors and walls that are designed to provide compartmentation.

Paraflam® is a perimeter fire stop designed for curtain walling and cavity barrier external rainscreen facades. Paraflam® is a non-combustible stone wool based product with a foil facing which prevents fibre migration and provides an excellent seal. It is designed to reinstate the fire resistance of a compartment, as well as offering good thermal and acoustic performance

Pipebloc EL is a fire resistant wrap on a roll consisting of 25m of self adhesive intumescent for interior penetration sealing applications. Pipebloc EL is designed to provide a high volume expansion and pressure seal during a fire to combustible pipes that pass through floor and wall service openings. Pipebloc EL is useful when the pipe diameter is unknown.

PipeBloc PCP is a fire resistant prefabricated pipe collar consisting of a metal casing and an intumescent insert for interior penetration sealing applications. PipeBloc PCP is designed to provide a high volume expansion and pressure seal during a fire to combustible pipes that pass through floor and wall service openings.

Pipebloc PWP is a fire resistant prefabricated pipe wrap consisting of a PE sheathing and an intumescent insert for interior penetration sealing applications. Pipebloc PWP is designed to provide a high volume expansion and pressure seal during a fire to combustible pipes that pass through floor and wall service openings.

PS Coating is an ablative brushable coating used to apply to uncoated stonewool boards to reinstate the fire resistance performance of wall and floor constructions where apertures are penetrated by single or multiple services.

Pyrocoustic® Fire Resistant Sealant is a water based, acrylic, ablative sealant. Pyrocoustic® is used to reinstate the fire resistance of wall and floor constructions in linear gap seals, and where apertures are penetrated by single or multiple services.

Silverliner® Open State Cavity Barrier (OSCB) is developed to protect the voids between the outer façade and the inner construction element of the building. The product is designed for use in a ventilated façade, the Silverliner® OSCB allows for 25mm or 50mm linear air gap to ensure movement of air and drain any moisture within the facade. The aluminium foil restricts fibre migration and offers a class ‘0’ rating. In the event of a fire the intumescent outer edge of the product will expand and close the ventilation gap between the product and the façade preventing the passage of fire and smoke from one compartment to another.

Silverseal HS Compound is a fire-resistant Gypsum based mortar material used to reinstate the fire resistance performance of floor and wall constructions where apertures exist and there is a requirement to reinstate the fire resistance of the substrate. It can be combined with many other FSi Promat passive fire protection products for sealing a wide range of installation service penetrations.

Silverseal® Compound is a fire-resistant Gypsum based mortar material used to reinstate the fire resistance performance of floor and wall constructions where apertures exist and there is a requirement to reinstate the fire resistance of the substrate. It can be combined with many other FSi Promat passive fire protection products for sealing a wide range of installation service penetrations.

S-Line Fire Pillow are a fire resistant penetration sealing system used to create a temporary or permanent fire barrier around single or multi-service penetrations to prevent the passage of fire through a compartment wall or floor, especially suitable where services are continuously being changed or replaced.

Stopseal Batt is a mineral wool based protection board coated with the fire resistant, ablative coating on both sides. It can be combined with many other FSi Promat passive fire protection products for sealing a wide range of installation service penetrations.

Stopseal® Ablative Spray Coating is to be used alongside the Stopseal® fire Batt system, to reinstate the fire resistance performance of wall constructions where they have been provided with apertures for the penetration of single or multiple services. Stopseal® Ablative Spray Coating is available in 5kg, 10kg and 20kg pails and can be applied with a brush or through spray application.

Brands